Artigos em periódicos

Artigos em periódicos
  • TAVARES, L.M. . Review and Further Validation of a Practical Single-particle Breakage Model. KONA Powder and Particle Journal, v. 39, p. 1-22, 2022.

  • SEGURA-SALAZAR, JULIANA ; SANTOS, N. S. ; Tavares, L.M. . Holistic pre-feasibility study of comminution routes for a Brazilian itabirite iron ore. Minerals, v. 11, p. 894, 2021.

  • SEGURA-SALAZAR, JULIANA ; Tavares, L.M. . A life cycle-based, sustainability-driven innovation approach in the minerals industry: Application to a large-scale granitic quarry in Rio de Janeiro. MINERALS ENGINEERING, v. 172, p. 107149, 2021.

  • MOURA, L. C. ; SOARES, B. G. ; INDRUSIAK, T. ; NEUMANN, R. ; TAVARES, L.M. . Granitic quarry waste as a dual functional filler for HDPE-based composites: mechanical and microwave absorbing properties. JOURNAL OF APPLIED POLYMER SCIENCE (ONLINE), v. 148, p. e51672, 2021.

  • TAVARES, L.M. . Review and Further Validation of a Practical Single-particle Breakage Model. KONA Powder and Particle Journal, v. 39, p. 1-22, 2022.

  • RODRIGUEZ, V.A.; BARRIOS, G.K.P.; BUENO, G.; TAVARES, L.M. Investigation of Lateral Confinement, Roller Aspect Ratio and Wear Condition on HPGR Performance Using DEM-MBD-PRM Simulations. MINERALS, V. 11, P. 801, 2021.

  • TAVARES, L. M., RODRIGUEZ, V. A., SOUSANI, M., PADROS, C. B., & OOI, J. Y. An effective sphere-based model for breakage simulation in DEM. POWDER TECHNOLOGY, v. 392, p. 473-488, 2021.

  • CARVALHO, R. M. ; CAMPOS, T. M. ; FARIA, P. M. ; TAVARES, L. M. . Mechanistic modeling and simulation of grinding iron ore pellet feed in pilot and industrial-scale ball mills. POWDER TECHNOLOGY, v. 392, p. 489-502, 2021.

  • MORENO-JUEZ, J.; TAVARES, L.M.; ARTONI, R.; CARVALHO, R. M.; CUNHA, EMERSON R.; CAZACLIU, B. Simulation of the Attrition of Recycled Concrete Aggregates during Concrete Mixing. MATERIALS, v. 14, p. 3007, 2021.

  • OLIVEIRA, A.L.R.; MAGALHÃES, R.M.; TAVARES, L. M. . Predicting the effect of operating and design variables in grinding in a vertical stirred mill using a mechanistic mill model. POWDER TECHNOLOGY, v. 387, p. 560-574, 2021.

  • TAVARES, L. M., 2021. Editorial for Special Issue “Comminution in the Minerals Industry”.

  • OLIVEIRA, F. C. ; KASSAB, M. P. ; SILVA, N. V. ; ANGULO, S. C. ; TAVARES, L. M. ; LANGE, D. A. . Probabilistic functions of mechanical properties of plain cement pastes determined by a reduced-size test. CONSTRUCTION AND BUILDING MATERIALS, v. 285, p. 122907, 2021.

  • CAMPOS, T. M. ; BUENO, G.; RODRIGUEZ, V.A. ; BOTTCHER, A. ; KWADE, A. ; MAYERHOFER, F. ; TAVARES, L.M. . Relationships between particle breakage characteristics and comminution response of fine iron ore concentrates. MINERALS ENGINEERING, v. 164, p. 106818, 2021.

  • CAMPOS, T. M. ; BUENO, G.; TAVARES, L. M. . Modeling comminution of iron ore concentrates in industrial-scale HPGR. POWDER TECHNOLOGY, v. 383, p. 244-255, 2021.

  • RODRIGUES, A.F.V. ; DELBONI JUNIOR, Homero ; POWELL, M. S. ; TAVARES, L. M. . Comparing strategies for grinding itabirite iron ores in autogenous and semiautogenous pilot-scale mills. MINERALS ENGINEERING, v. 163, p. 106780, 2021.

  • CAVALCANTI, P. P.; PETIT, H. A.; THOMAZINI, A. S.; CARVALHO, R. M.; TAVARES, L. M. Modeling of degradation by impact of individual iron ore pellets. Powder Technology, 2020.

  • TAVARES, L. M; CHAGAS, S. A stochastic particle replacement strategy for simulating breakage in DEM. Powder Technology, 2020.

  • FRANÇA, J. R. ; BARRIOS, G. K. P. ; TURRER, H. D. G. ; Tavares, L.M. . Comminution and liberation response of iron ore types in a low-grade deposit. MINERALS ENGINEERING, v. 158, p. 106590, 2020.

  • BARRIOS, G. K. P. ; JIMENEZ-HERRERA, N. ; FUENTES-TORRES, S. N. ; Tavares, L.M. . DEM Simulation of Laboratory-Scale Jaw Crushing of a Gold-Bearing Ore Using a Particle Replacement Model. Minerals, v. 10, p. 717, 2020.

  • CAMPOS, T.M.; BUENO, G.; TAVARES, L.M. Confined Bed Breakage of Fine Iron Ore Concentrates. Minerals 2020, 10, 666.

  • ANDRÉ, F. P., TAVARES, L. M., 2020. Simulating a laboratory-scale cone crusher in DEM using polyhedral particles. Powder Technology.

  • OLIVEIRA, A. L. R., RODRIGUEZ, V. A., DE CARVALHO, R. M., POWELL, M. S., TAVARES, L. M., 2020. Mechanistic modeling and simulation of a batch vertical stirred mill. Minerals Engineering, 156, 106487.

  • BARRIOS, G. K., JIMÉNEZ-HERRERA, N., TAVARES, L. M., 2020. Simulation of particle bed breakage by slow compression and impact using a DEM particle replacement model. Advanced Powder Technology.

  • PEPE, M., GRABOIS, T. M., SILVA, M. A., TAVARES, L. M., TOLEDO FILHO, R. D., 2020. Mechanical behaviour of coarse, lightweight, recycled and natural aggregates for concrete. Proceedings of the Institution of Civil Engineers-Construction Materials, 173(2), 70-78.

  • ANGULO, S. C. ; SILVA, N. V. ; BARBOSA, A. S. ; LANGE, D. A. ; TAVARES, L.M. . Probability distributions of mechanical properties of natural aggregates using a simple method. CONSTRUCTION AND BUILDING MATERIALS, v. 233, p. 117269, 2020.

  • VIEIRA, A. P. ; TOLEDO FILHO, R. D. ; TAVARES, L.M. ; CORDEIRO, G. C. . Effect of particle size, porous structure and content of rice husk ash on the hydration process and compressive strength evolution of concrete. CONSTRUCTION AND BUILDING MATERIALS, v. 236, p. 117553, 2020.

  • TAVARES, L.M. ; CARVALHO, R. M. ; BONFILS, B. ; OLIVEIRA, A.L. . Back-calculation of particle fracture energies using data from rotary breakage testing devices. MINERALS ENGINEERING, v. 149, p. 106263, 2020.

  • TAVARES, L. M.; DE ALMEIDA, RAFAELLA F. Breakage of green iron ore pellets. POWDER TECHNOLOGY, v. 366, p. 497-507, 2020.

  • BURROWES, M. ; PEREIRA, G. R. ; TAVARES, L.M. . Validation and Calibration of Computer-simulated Probability of Detection Curves from Ultrasonic Inspection. INSIGHT, v. 61, p. 197-203, 2019.​

  • SEGURA, J.S. ; LIMA, F. M. ; TAVARES, L.M. Life Cycle Assessment in the minerals industry: Current practice, harmonization efforts, and potential improvement through the integration with process simulation. JOURNAL OF CLEANER PRODUCTION, v. 232, p. 174-192, 2019.

  • CAVALCANTI, P. P. ; TAVARES, L.M. Static and dynamic compressive loading of fired iron ore pellets. POWDER TECHNOLOGY, p. 281-288, 2019.

  • FARIA, P. ; RAJAMANI, R. K. ; Tavares, L.M. . Optimization of Solids Concentration in Iron Ore Ball Milling through Modeling and Simulation. Minerals, v. 9, p. 366, 2019.

  • SILVA, N. V. ; ANGULO, S. C. ; BARBOSA, A. S. ; LANGE, D. A. ; TAVARES, L. M. . Improved method to measure the strength and elastic modulus of single aggregate particles. MATERIALS AND STRUCTURES, v. 52, p. 77, 2019. 

  • CAMPOS, T. M. ; BUENO, GILVANDRO ; BARRIOS, G. K. P. ; TAVARES, L.M. Pressing iron ore concentrate in a pilot-scale HPGR. Part 1: Experimental results. MINERALS ENGINEERING, v. 140, p. 105875, 2019.

  • CAMPOS, T. M. ; BUENO, GILVANDRO ; BARRIOS, G. K. P. ; TAVARES, L.M. Pressing iron ore concentrate in a pilot-scale HPGR. Part 2: Modeling and simulation. MINERALS ENGINEERING, v. 140, p. 105876, 2019. 

  • ANDRE, F. P. ; MICELI, H. ; MOURA, L. C. ; NEUMANN, R. ; TAVARES, L.M. Upgrading a manufactured fine aggregate for use in concrete using dry rare-earth magnetic separation. MINERALS ENGINEERING, v. 143, p. 105942, 2019. 

  • CAVALCANTI, P. P. ; CARVALHO, R. M. ; CHAGAS, A.S. ; DA SILVEIRA, MARCUS W. ; TAVARES, L.M. Surface breakage of fired iron ore pellets by impact. POWDER TECHNOLOGY, v. 342, p. 735-743, 2019. 

  • MOURA, LUANNA C. ; ANDRÉ, FLÁVIO P. ; MICELI, HAYLA ; NEUMANN, REINER ; TAVARES, L.M. Manufactured Feldspar-quartz Sand for Glass Industry from Gneiss Quarry Rock Fines Using Dry Rare-earth Magnetic Separation. Mineral Processing and Extractive Metallurgy Review, v. 40, p. 1-11, 2019.

  • CORDEIRO, G. C. ; ANDREAO, P. V. ; TAVARES, L.M. Pozzolanic properties of ultrafine sugar cane bagasse ash produced by controlled burning. HELIYON, v. 5, p. e02566, 2019.

  • TAVARES, L.M. ; ANDRÉ, FLÁVIO P. ; POTAPOV, A. ; MALISKA JR., C. . Adapting a breakage model to discrete elements using polyhedral particles. POWDER TECHNOLOGY, p. 208-220, 2019.

  • BOECHAT, F.O. ; CARVALHO, Rodrigo Magalhães de ; Tavares, L.M. . Simulation of Mechanical Degradation of Iron Ore Pellets in a Direct Reduction Furnace. KONA Powder and Particle Journal, p. 216-225, 2018.

  • CAVALCANTI, P. P. S. ; TAVARES, L.M. Statistical analysis of fracture characteristics of industrial iron ore pellets. POWDER TECHNOLOGY, v. 325, p. 659-668, 2018.

  • JIMENEZ-HERRERA, N. ; BARRIOS, G. K. P. ; TAVARES, L.M.M. . Comparison of breakage models in DEM in simulating impact on particle beds. ADVANCED POWDER TECHNOLOGY, v. 29, p. 692-706, 2018.

  • CUNHA, Emerson Reikdal da ; CAVALCANTI, P. P. S. ; SAEIDI, F. ; TAVARES, L.M. . On the limitation of using the JKRBT in investigating incremental breakage. MINERALS ENGINEERING, v. 118, p. 33-36, 2018.

  • BOECHAT, F.O. ; ROCHA, L. T. ; CARVALHO, Rodrigo Magalhães de ; JUNG, S. ; TAVARES, L.M. Amenability of Reduced Iron Ore Pellets to Mechanical Degradation. ISIJ INTERNATIONAL, v. 58, p. 1028-1033, 2018.

  • CORDEIRO, G. C. ; PAIVA, O. A. ; TOLEDO FILHO, R. D. ; FAIRBAIRN, E. M. R. ; TAVARES, L. M. Long-Term Compressive Behavior of Concretes with Sugarcane Bagasse Ash as a Supplementary Cementitious Material. JOURNAL OF TESTING AND EVALUATION, v. 46, p. 20160316, 2018.

  • SILVA, B. B. ; CUNHA, E. R.; CARVALHO, R.M. ; TAVARES, L.M. . Modeling and simulation of green iron ore pellet classification in a single deck roller screen using the discrete element method. POWDER TECHNOLOGY, v. 332, p. 359-370, 2018.

  • SEGURA, J.S. ; TAVARES, L.M. Sustainability in the Minerals Industry: Seeking a Consensus on Its Meaning. Sustainability, v. 10, p. 1429, 2018.

  • TAVARES, L.M. ; CAVALCANTI, P. P. S. ; CARVALHO, Rodrigo Magalhães de ; M.A.C.W. da Silveira ; BIANCHI, M. R. ; OTAVIANO, M. . Fracture probability and fragment size distribution of fired Iron ore pellets by impact. POWDER TECHNOLOGY, v. 336, p. 546-554, 2018.

  • RODRIGUEZ, V.A. ; de Carvalho, Rodrigo M. ; TAVARES, L.M. Insights into advanced ball mill modelling through discrete element simulations. MINERALS ENGINEERING, v. 127, p. 48-60, 2018.

  • OLIVEIRA, A.L. ; TAVARES, L.M. Modeling and simulation of continuous open circuit dry grinding in a pilot-scale ball mill using Austin's and Nomura's models. POWDER TECHNOLOGY, v. 340, p. 77-87, 2018.

  • PEPE, MARCO ; GRABOIS, THIAGO MELO ; SILVA, MARCO ANTONIO ; TAVARES, L.M. ; TOLEDO, R. D. Mechanical behaviour of coarse, lightweight, recycled and natural aggregates for concrete. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS. CONSTRUCTION MATERIALS (ONLINE), v. 173, p. 1-9, 2018.

  • TAVARES, L.M. A Review of Advanced Ball Mill Modelling. KONA Powder and Particle Journal, p. 106-124, 2017.

  • SAEIDI, F. ; YAHYAEI, M. ; POWELL, M. S. ; TAVARES, L.M. Investigating the effect of applied strain rate in a single breakage event. Minerals Engineering, v. 100, p. 211-222, 2017.

  • BENZER, H. ; DUNDAR, H. ; ALTUN, O. ; TAVARES, L.M. ; MAZZINGHY, D. B. ; RUSSO, J. C. . HPGR simulation from piston-die tests with an itabirite ore. REM - International Engineering Journal, v. 70, p. 99-107, 2017.

  • BOECHAT, F.O. ; de CARVALHO, R. M. ; TAVARES, L.M.. AVALIAÇÃO DE INTERAÇÕES ENTRE QUEBRADORES E CLUSTERS EM FORNO DE REDUÇÃO DIRETA USANDO O MÉTODO DOS ELEMENTOS DISCRETOS. TECNOLOGIA EM METALURGIA, MATERIAIS E MINERAÇÃO, v. 14, p. 349-356, 2017.

  • FLORES, Y.C. ; CORDEIRO, G. C. ; TOLEDO FILHO, R. D. ; TAVARES, L.M. Performance of Portland cement pastes containing nano-silica and different types of silica. CONSTRUCTION AND BUILDING MATERIALS, v. 146, p. 524-530, 2017.

  • SEGURA, J.S. ; RODRIGUEZ, V.A. ; BARRIOS, G. K. P. ; TAVARES, L.M. Mathematical modeling of a vertical shaft impact crusher using the Whiten model. MINERALS ENGINEERING, v. 111, p. 222-228, 2017.

  • MICELI, H. ; ROSSI, M.G. ; NEUMANN, R. ; TAVARES, L.M. Contaminant removal from manufactured fine aggregates by dry rare-earth magnetic separation. MINERALS ENGINEERING, v. 113, p. 15-22, 2017.

  • BARRIOS, G. K. P. ; TAVARES, L.M. A preliminary model of high pressure roll grinding using the discrete element method and multi-body dynamics coupling. International Journal of Mineral Processing (Print), v. 156, p. 32-42, 2016.

  • SAEIDI, F. ; TAVARES, L.M. ; YAHYAEI, M. ; POWELL, M. S. . A phenomenological model of single particle breakage as a multi-stage process. Minerals Engineering, v. 98, p. 90-100, 2016.

  • Cordeiro, G.C. ; TAVARES, L. M. ; TOLEDO FILHO, R. D. . Improved pozzolanic activity of sugar cane bagasse ash by selective grinding and classification. Cement and Concrete Research, v. 89, p. 269-275, 2016.

  • RANGEL, B.F. ; VIANA, M.M. ; FONSECA, M. V. A. ; DWECK, Jo ; TAVARES, L.M. Thermal characterization of a new green ceramic material by heating microscopy, thermogravimetry and differential thermal analysis. Journal of Thermal Analysis and Calorimetry, v. 121, p. 115-125, 2015.

  • MAGALHAES, F. N. ; TAVARES, L.M. Rapid ore breakage parameter estimation from a laboratory crushing test. International Journal of Mineral Processing (Print), v. 126, p. 49-54, 2014.

  • RIBAS, L.; CORDEIRO, G.C.; TOLÊDO FILHO, R. D.; TAVARES, L.M.. Measuring the strength of irregularly shaped fine particles in a microcompression tester. Minerals Engineering , 2014.

  • MAGALHAES, F.N.; TAVARES, L.M.. Rapid ore breakage parameter estimation from a laboratory crushing test. International Journal of Mineral Processing (Print), v. 126, p. 49-54, 2014.

  • CARVALHO, R.M.; TAVARES, L.M.. Predicting the effect of operating and design variables on breakage rates using the mechanistic ball mill model. Minerals Engineering, v. 43-44, p. 91-101, 2013.

  • TAVARES, L.M.; KALLEMBACK, R.D.. Grindability of binary ore blends in ball mills. Minerals Engineering, v. 41, p. 115-120, 2013.

  • BARRIOS, G.K.P.; CARVALHO, R.M.; KWADE, A.; TAVARES, L.M.. Contact parameter estimation for DEM simulation of iron ore pellet handling. Powder Technology (Print), v. 248, p. 84-93, 2013.

  • DA CUNHA, E.R.; CARVALHO, R. M.; TAVARES, L. M.. Simulation of solids flow and energy transfer in a vertical shaft impact crusher using DEM. Minerals Engineering, v. 43-44, p. 85-90, 2013.

  • WEERASEKARA, N.S.; POWELL, M.S.; CLEARY, P.S.; TAVARES, L.M.; EVERTSSON, M.; MORRISON, R.D.; QUIST, J.; CARVALHO, R.M.. The contribution of DEM to the science of comminution. Powder Technology, v. 248, p. 3-24, 2013.

  • CORDEIRO, G.C.; TOLEDO FILHO, R.D.; TAVARES, L.M.; FAIRBAIRN, E.M.R.. Experimental characterization of binary and ternary blended-cement concretes containing ultrafine residual rice husk and sugar cane bagasse ashes. Construction & Building Materials, v. 29, p. 641-646, 2012.

  • TAVARES, L.M.; CARVALHO, R.M.; GUERRERO, J.C.. Simulating the Bond rod mil grindability test. Minerals Engineering, v. 26, p. 99-101, 2012.

  • MARINS, S.S.; OGASAWARA, T.; TAVARES, L.M.. Synthesis of manganese zinc ferrite by powder mixing using ferric oxide from a steel mill acid recovery unit. Journal of Materials Science, v. 46, p. 1640-1645, 2011.

  • BARRIOS, G.K.P.; CARVALHO, R.M.; TAVARES, L.M.. Extending breakage characterisation to fine sizes by impact on particle beds. Transactions - Institution of Mining and Metallurgy. Section C. Mineral Processing & Extractive Metallurgy, v. 120, p. 37-44, 2011.

  • CORDEIRO, G.C.; TOLEDO FILHO, R.D.; TAVARES, L.M.; FAIRBAIRN, E. M. R.; HEMPEL, S.. Influence of particle size and specific surface area on the pozzolanic activity of residual rice husk ash. Cement & Concrete Composites, v. 33, p. 529-534, 2011.

  • BARRIOS, G.K.P.; CARVALHO, R.M.; TAVARES, L.M.. Modeling breakage of monodispersed particles in unconfined beds. Minerals Engineering, v. 24, p. 308-318, 2011.

  • GAIDZINSKI, R.; DUALIBI FILHO, J.; TAVARES, L.M.. Influence of aging on the technological properties of clays in the ceramic industry. Applied Clay Science, v. 54, p. 47-52, 2011.

  • TAVARES, L.M.; CARVALHO, R.M.. Modeling ore degradation during handling using continuum damage mechanics. International Journal of Mineral Processing, p. 21-27, 2010.

  • GAIDZINSKI, R.; OSTERREICHER, P.; DUAILIBI FILHO, J.; TAVARES, L.M.. Modification of clay properties by aging: role of indigenous microbiota and implications on ceramic processing. Applied Clay Science, v. 43, p. 98-102, 2009.

  • TAVARES, L.M.. Analysis of particle fracture by repeated stressing as damage accumulation. Powder Technology, v. 190, p. 327-339, 2009.

  • GONCALVES, J ; TOLÊDO FILHO, R.D.; TAVARES, L.M.; FAIRBAIRN, E.M.R.. Performance evaluation of cement mortars modified with metakaolin or ground brick. Construction & Building Materials, v. 23, p. 1971-1979, 2009.

  • TAVARES, L.M.; CARVALHO, R.M.. Modeling breakage rates of coarse particles in ball mills. Minerals Engineering, v. 22, p. 650-659, 2009.

  • TAVARES, L.M.; CERQUEIRA, M.C.; IESS, J.J.. Analysis of the grinding behaviour of various Portland cement clinkers. Zement - Kalk - Gips International, v. 62, p. 95-104, 2009.

  • CORDEIRO, G.C.; TOLÊDO FILHO, R.D.; FAIRBAIRN, E.M.R.; TAVARES, L.M.. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete. Cement and Concrete Research, v. 39, p. 110-115, 2009.

  • CARVALHO, R. M.; TAVARES, L.M.. Dynamic modeling of comminution using a general microscale breakage model. Computer-Aided Chemical Engineering, v. 27, p. 519-524, 2009.

  • LOUREIRO, S.A.; FRUCHART, D.; RIVOIRARD, S.; SANTOS, D.S.; TAVARES, L.M.. Synthesis, Hydrogenation and Mechanical Milling of Pseudo-Binary Zr(NbxV1-x)2 (0?x?0.65) Alloys. Materials Science Forum, v. 570, p. 45-51, 2008.

  • LOUREIRO, S.A.; FRUCHART, D.; RIVOIRARD, S.; SANTOS, D.S.; TAVARES, L.M.. Mechanical Alloying of Zr-Nb5%at. Powders: Microstructural Evolution and Hydrogenation Properties. Materials Science Forum, v. 570, p. 59-64, 2008.

  • CORDEIRO, G.C.; TOLÊDO FILHO, R.D.; TAVARES, L.M.; FAIRBAIRN, E.M.R.. Pozzolanic activity and filler effect of sugar cane bagasse ash in Portland cement and lime mortars. Cement & Concrete Composites, v. 30, p. 410-418, 2008.

  • TAVARES, L.M.; NEVES, P.B.. Microstructure of quarry rocks and relationships to particle breakage and crushing. International Journal of Mineral Processing, v. 87, p. 28-41, 2008.

  • GONÇALVES, J.; TAVARES, L.M.; TOLÊDO FILHO, R.D.; FAIRBAIRN, E.M.R.; CUNHA, E.R.. Comparison of natural and manufactured fine aggregates in cement mortars. Cement and Concrete Research, v. 37, p. 924-932, 2007.

  • TAVARES, L.M.; CUNHA, E.R.; ALMEIDA, S.L.. Influência de variáveis operacionais no desempenho de classificador aerodinâmico. Revista da Escola de Minas, v. 60, p. 497-503, 2007.

  • LOUREIRO, S.A.; TAVARES, L.M.; SALUSTIANO, A.; SANTOS, D.S.. Macroscale and microscale evolutions of mechanically alloyed Fe-Zn systems. Journal of Physics and Chemistry of Solids, v. 68, p. 1845-1855, 2007.

  • OGASAWARA, T.; TAVARES, L.M.; MARINS, S.S.. Thermodynamic interpretation of manganese-zinc ferrite synthesis by calcination of a powder mixture. Materials Letters, v. 61, p. 5063-5066, 2007.

  • TAVARES, L.M.; CARVALHO, R.M.. Impact work index prediction from continuum damage model of particle fracture. Minerals Engineering, v. 20, p. 1368-1375, 2007.

  • DUTRA, A.J.B.; PAIVA, P.R.P.; TAVARES, L.M.. Alkaline leaching of zinc from electric arc furnace steel dust. Minerals Engineering, v. 19, n.5, p. 478-485, 2006.

  • TAVARES, L.M.; CERQUEIRA, M.C.. Statistical analysis of impact-fracture characteristics of industrial Portland cement clinkers. Cement and Concrete Research, v. 36, p. 409-415, 2006.

  • TAVARES, L.M.; LIMA, A.S.. Célula de carga de impacto na caracterização de materiais para a cominuição. Parte 1: calibração. Revista da Escola de Minas, Ouro Preto, v. 59, n.1, p. 61-69, 2006.

  • TAVARES, L.M.; LIMA, A.S.. Célula de carga de impacto na caracterização de materiais para a cominuição. Parte 2: fratura de partículas. Revista da Escola de Minas, Ouro Preto, v. 59, n.2, p. 165-172, 2006.

  • CARNEIRO NETTO, B.P.; TAVARES, L.M.. Produção de agregado graúdo para a construção civil. Parte 1: Uma nova concepção de lavra. Areia & Brita, São Paulo, v. 34, n.jun, p. 8-14, 2006.

  • CARNEIRO NETTO, B.P.; TAVARES, L.M.. Produção de agregado graúdo para a construção civil. Parte 2: Novos conceitos no projeto de usinas de beneficiamento. Areia & Brita, São Paulo, v. 35, p. 20-27, 2006.

  • GONÇALVES, J.; TOLÊDO FILHO, R.D.; FAIRBAIRN, E.M.R.; TAVARES, L.M.. Utilização de areia industrial para produção de concretos. TECBAHIA, v. 21, p. 74-88, 2006.

  • TAVARES, L.M.; KING, R.P.. Continuum damage modeling of particle fracture. Zement - Kalk – Gips International, Gütersloh, v. 58, n.1, p. 49-58, 2005.

  • TAVARES, L.M.. Particle weakening in high-pressure roll grinding. Minerals Engineering, v. 18, p. 651-657, 2005.

  • GAIDZINSKI, R.; DUAILIBI FILHO, J.; TAVARES, L.M.. Sazonamento e homogeneização de argilas em pilhas. Cerâmica Industrial, São Carlos, v. 10, n.5/6, p. 19-22, 2005.

  • TAVARES, L.M.; KING, R.P.. Modeling of the load-deformation response from impact-breakage of particles. International Journal of Mineral Processing, v. 74, n.1001, p. S267-S277, 2004.

  • TAVARES, L.M.. Optimum routes for particle breakage by impact. Powder Technology, v. 142, n.2-3, p. 81-91, 2004.

  • NEVES, P.B.; TAVARES, L.M.. RACIONALIZAÇÃO DO USO DA ENERGIA NA BRITAGEM COM AUXÍLIO DE SIMULAÇÃO COMPUTACIONAL. Tecnologia em Metalurgia Materiais e Mineração, São Paulo, v . 1, n.2, p. 53-58, 2004.

  • TAVARES, L.M.; KING, R.P.. Modeling of particle fracture by repeated impacts using continuum damage mechanics. Powder Technology, v. 123, n.2-3, p. 138-146, 2002.

  • TAVARES, L.M.; SOUZA, L.L.G.; POSSA, M.V.; LIMA, J.R.B.. Modeling classification in small diameter hydrocyclones under variable rheological conditions. Minerals Engineering, v. 15, p. 613-622, 2002.

  • TAVARES, L.M.; CAFFARENA, V.R.; SANTOS, J.G.; CABRAL, A.J.O.; OGASAWARA, T.. The contribution of ultra-fine milling for the microstructure and density of the doped barium hexaferrite sintered discs. Acta Microscópica, v. 11, p. 13-16, 2002.

  • SOUZA, V.C.G.; SAMPAIO, C.H.; TAVARES, L.M.. Estudo por microscopia óptica e lupa das características mineralógicas e microestruturais do clínquer aplicado ao processo de moagem e qualidade do cimento. Revista da Escola de Minas, v. 55, n.2, p. 125-129, 2002.

  • SOUZA, V.C.G.; SAMPAIO, C.H.; TAVARES, L.M.. Estudo da influência da microestrutura do clínquer sobre a moagem na fabricação de cimento: microscopia eletrônica de varredura. Revista da Escola de Minas, Ouro Preto, v. 55, n.3, p. 209-213, 2002.

  • TAVARES, L.M.. Um novo método para o Cálculo da Eficiência Energética de Moinhos Industriais. Matéria (UFRJ), Rio de Janeiro, v. 6, n.1, 2001.

  • TAVARES, L.M.; CABRAL, A.J.O.; OGASAWARA, T.. Preparação de óxido de ferro sub-micrométrico para aplicação em cerâmicas magnéticas por moagem de alta energia. Matéria (UFRJ), Rio de Janeiro, v. 6, n.1, p.1-7, 2001.

  • TAVARES, L.M.; KING, R.P.. Evaluation of Thermally-Assisted Fracture of Particles using Microscale Fracture Measurements. Kona (Osaka), Japão, v. 17, n.1, p. 163-172, 2000.

  • TAVARES, L.M.. Energy absorbed in breakage of single particles in drop weight testing. Minerals Engineering, Oxford, v. 12, n.1, p. 43-50, 1999.

  • TAVARES, L.M.. Monte Carlo Simulations on the Potential Energy Theory of Jigging. Coal Preparation (New York, N.Y.), v. 20, p. 71-83, 1999.

  • TAVARES, L.M.. Single-particle fracture under impact loading. International Journal of Mineral Processing, Holanda, v. 54, n.1, p. 1-28, 1998.

  • POCOCK, J.; VEASEY, T.J.; TAVARES, L.M.; KING, R.P.. The Effect of Heating and Quenching of Quartzite on Grinding Characteristics. Powder Technology, v. 95, p. 137-142, 1998.